I recommend it
The official website of the E-Energy

How to save the electricity

To date, the largest amount of electrical energy on Earth is produced from sources (oil, gas, stone and brown coal).The reserves of these fossils are not unlimited, so the foreseeable future electricity will increase, unless scientists develop new cheap and extremely effective methods to use the potential of non -mediated energy sources (sun, wind, ground and hands).

Electricity Savings by optimizing consumption

Above all, you should think that in some cases it is possible to completely leave the use of electrical appliances or to reduce their operation.You must consider the following points:

  • If possible, use the daytime day to increase the maximum illumination of the room.Regular washing the windows, raised shutters and open curtains allow you to turn on later lighting, which will result in a total of one month.In addition, light wallpapers or paints on the wall and ceiling can return to 80% of sunlight, while the room is noticeably lighter than when repairing in dark colors.
    • Electricity Savings with various types of lamps
  • Ground bulbs, and especially the ceiling, increase the emissions of the device by 10-15%.If you use a clean chandelier with an open ceiling, you can screw a bulb.
  • We recommend that you buy the top chandelier with the possibility of turning on some of the onions separately.When watching the television show, a lamp will be sufficient and will use full lighting when welcoming the guests.
  • Combined illumination (candles on the walls, base lamps, desk lamps) not only save at home electricity, but also the required atmosphere in the required atmosphere (business, romantic, comfortable).With proper use of local lighting, the general can be minimized.
  • The light should not be burned in the rooms currently not used.With a certain effort, this habit is caused by each family member for several months.If no one is left in the house or in the apartment, it is advisable to turn off all energy saving devices, except for the refrigerator.
  • Devices in standby mode do not consume that much electricity, but if you remember how many such devices there is in the house, it becomes clear that much of the energy is almost wasted.For example, a standard speaker system requires 11 mass hours in standby mode.
  • Checking and replacing old wires will not be unnecessary for savings and fire safety.The number of T-shirts, adapters and extensions should be minimized as their use leads to an increase in network resistance and energy loss to 30%.It is better to install a few more sockets when replacing the wires.

How to save electrical energy using energy -receiving technologies

Almost every more -less fair, modern company that manufactures household or computer equipment is struggling to save energy.In the growth conditions of electrician prices, this offers them a competitive advantage.

The consumer of these tools should only monitor the care of new market offers.

  • Purchase of electrical appliances.The most economical tools for the Energy Consumption of their energy consumption, A, A+, A ++, are the most economical tools in Class G, G.The difference between Class A and G may be double.
  • However, acquiring an energy receiving device is only half of the case.It should still be operated correctly.Thus, the clogged bag in the vacuum cleaner leads to a 40% loss of current, approximately the same image in a refrigerator, covered with a layer of snow and ice.
  • The insulation of an apartment or house (replacing the windows with metal -plastic, walls with walls or mineral insulation, door compression, balcony glazing and loggia) can be better retained.As a result, before the start of the heating period, the powerful electric heating equipment can be less used or used to create a comfortable temperature that creates a more profitable air conditioning during heating.
  • The easiest way to save electricity is to replace incandescent lamps with energy.At the same time, much more expensive lamps (energy -saving fluorescent or LEDs) require the purchase of much more expensive, but their installation will be returned quite quickly, sometimes within one year.The luminescent "economy" consumes five times less than the usual "Ilyich lamp" and the LED - more than eight times.At the same time, economic lamps serve ten times longer.

How to save home electricity, taking into account its consumption

On this issue, the assistant may be tools that provide visual information on the possibility of energy consumed and more rational use.

  • Electronic meter E/Energy of two or three colors.Installation allows you to share your day and night consumed energy.Night tariffs are about 30%lower.The reason for this is that the emptying of electrical networks during peak hours and relocating some of the consumption for a "calmer" time.Therefore, it is profitable for a consumer who later has such a counter to use energy cost devices (boiler, washing machine, iron, dishwasher, bread button, pressure cooking), which can be used in certain hours.The counter must be legalized for the electricity supply company.
  • Light Regulator (Dimmer).This device is installed instead of the switch and allows you to adjust the brightness of the lamp light.The same lamp can be used to provide the room for general lighting, reading, watching TV or night light.There are also light regulators that are able to switch from a remote control or multiple points.The advantage of dimmers is to extend the life of the lamps but cannot be used for all types of lighting.
  • Pulse relay.This allows you to check the illumination from different locations of the house, and it is convenient to use when you press a button to turn off all the lighting in the room.
  • Motion sensors.They are installed in residential and office rooms and in the courtyards.Turn on and off the light in the presence or absence of movement.
  • Household wattmeter.Allows the power to measure the power consumption of each device, frequency and voltage in the network.Use this information to take measures to save electricity.

How to save home electricity

The strongest tools in the house are the refrigerator and the electric stove.People have often used the same refrigerator for over 10 years.At the same time, the technology has stepped forward at this time that half of the new fridge consumption so much energy, so saving the new device when you buy a new device will keep the person losing to paying your accounts.

  • The refrigerator is not allowed near the plates or near the heating of the batteries, in poorly ventilated corners and gaps - resulting in overheating and more frequent insertion.For the same reason, it is not advisable to place a plate and pot with hot products in the refrigerator, and to open the door too frequently or for a long time.For money saving it, it is also better to place the device to cool down the average mode and defrost it regularly and clean it from snow and ice.
  • Not all houses are in every house, but where it is, the cost of the electricians behind it.But here's an opportunity to save energy.The size of the food in which the food prepares should not be less than the burner used, the bottom should be even.The dish closed with the lid is made 20-30% faster.After hot water, the combustion temperature is the most low temperature system - which does not affect the process of preparing the vessel, but reduces the consumption of E/energy.
  • The washing machine operates the most stable than the control load specified in the instructions.The unjustified use of overload or incomplete load and preliminary washing function increases the consumption of electricians from 10 to 30%.
  • It requires regular cleaning of the electrician.In addition, do not boil the entire kettle for the future, enough water to cook a cup of tea.
  • Turn on the air conditioner with only tightly closed windows and doors to prevent the street from cooling, select the device according to the technical features appropriate to the room to be cooled.There are models for convertor air conditioners that are 50%with reduced electricians.

This is only part of the tips related to electricity cleaning.In more detail, you can find in other articles in the section.However, we must not forget that saving resources is not only care for their own wallets, but also preserve the environment of children and grandchildren.

Each 100 generatur Watt electricity means burning 33 liters of oil or 48 kilograms of hay or 35 cubic meters of natural gas.Adding to this is the problem of nature pollution from harmful emissions, it becomes clear that the use and savings of electricity are not only the private question of individual consumers, but also the global problem of all humanity.